Tweet

Old bronze bulb holder lampholder BC / B22 earthed 45mm high x 32mm width 10mm base thread entry threaded skirt and shade ring.  

10mm base thread

The lamp holder has a threaded skirt and shade ring

click arrow singles,  3's , 5's or 10's

Note: Due to lighting effect, monitor's brightness etc, there could be some slight differences in the colour between the photo and the actual item, we are not responsible for these issues.
If you have ordered the wrong item, size or colour please do not panic it is not the end of the world as we are happy to help.  Most issues can be resolved with an exchange – please email with details of the problem and we can advise and give details of our return process to allow an exchange.

FAQS - These are some of the frequent questions we are asked about our ranges of lamp holders

Q) Which bulb should I use for my lamp holder 
A)  https://kingschandeliers.wordpress.com/2016/07/29/choosing-the-correct-lamp-holder-or-light-bulb/

Q) I have purchased a 10mm threaded lamp holder but it will not fit the 10mm thread on my light fitting
A)  All our lamp holders are a metric thread so if  this does not fit you may have an Imperial thread.

Q) My lamp holder starts to come loose when I remove my light bulb,  how can I stop this from happening?
A) If your lamp holder has a locking nut (we will include this information in the item description) tighten the locking nut and this will resolve this issue.  If your lamp holder does not have a locking nut screw a nut on to the threaded rod and then screw your lamp holder down tight to the nut, when you next need to remove your light bulb the lamp holder will remain firmly in place

Q) I have locked my Edison Screw lamp holder  how do I unlock it? 
A)  We have produced a video showing how to  release your lamp holder https://www.youtube.com/watch?v=Nwf4xBuR4Zw

Q) Which terminal is the live terminal and which is the neutral?
A) As long as the earth cable is wired in correctly to the earthing point which will be indicated by an earth symbol it does not matter which terminal is used for the live and neutral

Manufactured to comply to:-

IEC/EN 61184: 2008 + A1:2011

Old bronze bulb holder lampholder BC / B22 earthed 45mm high x 32mm width 10mm base thread entry threaded skirt and shade ring.  

10mm base thread

The lamp holder has a threaded skirt and shade ring

click arrow singles,  3's , 5's or 10's

Note: Due to lighting effect, monitor's brightness etc, there could be some slight differences in the colour between the photo and the actual item, we are not responsible for these issues.
If you have ordered the wrong item, size or colour please do not panic it is not the end of the world as we are happy to help.  Most issues can be resolved with an exchange – please email with details of the problem and we can advise and give details of our return process to allow an exchange.

FAQS - These are some of the frequent questions we are asked about our ranges of lamp holders

Q) Which bulb should I use for my lamp holder 
A)  https://kingschandeliers.wordpress.com/2016/07/29/choosing-the-correct-lamp-holder-or-light-bulb/

Q) I have purchased a 10mm threaded lamp holder but it will not fit the 10mm thread on my light fitting
A)  All our lamp holders are a metric thread so if  this does not fit you may have an Imperial thread.

Q) My lamp holder starts to come loose when I remove my light bulb,  how can I stop this from happening?
A) If your lamp holder has a locking nut (we will include this information in the item description) tighten the locking nut and this will resolve this issue.  If your lamp holder does not have a locking nut screw a nut on to the threaded rod and then screw your lamp holder down tight to the nut, when you next need to remove your light bulb the lamp holder will remain firmly in place

Q) I have locked my Edison Screw lamp holder  how do I unlock it? 
A)  We have produced a video showing how to  release your lamp holder https://www.youtube.com/watch?v=Nwf4xBuR4Zw

Q) Which terminal is the live terminal and which is the neutral?
A) As long as the earth cable is wired in correctly to the earthing point which will be indicated by an earth symbol it does not matter which terminal is used for the live and neutral

Manufactured to comply to:-

IEC/EN 61184: 2008 + A1:2011